Balance Board Ball STL

Here is the STL file to build your own Standing Desk Balance Board! If you look up these awesome devices, they can cost between $120 and $180. Well this file will help you build one for a fifth of the price! After downloading my file, print it with 4 walls, 35% infill in either grid or cubic. It will take around 11 hours and use 275g of PLA.

Cut a sheet of 5 Ply down to around 14”x30” and sand the edges. No need to stain or paint it.

Purchase some 4” wide grip tape. I used 10’ of this per board: https://www.amazon.com/gp/product/B08Q8KWV6S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Lastly, you will need 4 screws with a cap smaller than 9mm and a thread OD smaller than 7mm